Draw Tite Electric Trailer Brake Controller

Draw-Tite's Activator IV electronic trailer brake control combines all the great features found on Activator I & II, III plus it features a Plug-N-Play port to accept Tow Ready custom fit wiring harnesses, making installation on most full-size pickups, vans and SUV's a snap.

Activator IV is compact and contains no moving parts or pendulums so it can be mounted virtually anywhere and in any position. Also equipped with on-board diagnostics for overload, open ground.

Not recommended for use with BMW X5 Sport Utility Vehicles.

Specs

Fits	2, 4, 6, 8 Brake Trailers
Installation Instructions	CLICK HERE

Features

Output - For ease of adjustment, the output control is located on the front of Activator IV. It has a up-front push button adjustment and its output indicator is a digital display that shows the output when the brakes are applied.
Sync - The sync control has push button adjustment located on the front of the controller to syncronize the braking between the tow vehicle and trailer. The sync setting is shown on the Activator IV's digital display.
Manual - The manual control is activated by squeezing the trigger located on the front of Activator IV. When applied, it will illuminate both the tow vehicle and trailer's stop lights as required by National Highway Traffic Safety Administration regulations.
Installation - Activator IV has no moving parts or pendulums to adjust, so it can be mounted in virtually any position. Activator IV also includes a Plug-N-Play port to accept Tow Ready brake control harnesses. Click Here to find a custom fit brake control harness for your vehicle.

Included:

Mounting Bracket and Hardware

Not Included:

Wiring Adapter

Draw-Tite

Over fifty years and millions of trailer hitches later, our 500 dedicated employees put the same care and patience into every hitch we build today as Bill Whichello did fifty years ago. We also make use of technologically advanced equipment and the most experience in the industry to meet the challenges of tow vehicles.

The basis of our continued success is that our trailer hitches are custom fit for each vehicle. This makes them easy to install. A dealer simply bolts one piece, welded trailer hitches to the vehicle frame. Most installations take 30 minutes or less.

Our trailer hitches are covered by a Nationwide/lifetime limited warranty. We have over 10,000 dealers throughout North America. So wherever you live or travel, there is always a knowledgeable and helpful Draw-Tite dealer nearby. This is especially important when you consider nearly 100% of our consumers use their trailer hitch to tow outside of their local area.

The above information has been provided by the Manufacturer, and we cannot guarantee the accuracy thereof or endorse the opinions expressed.